Thread Theory

Welcome to the new era of menswear sewing. Go ahead and create something exceptional!

Waistcoat Sew-Along: Day 9 – Finishing the Front

1 Comment

Today we will be attaching the lining and facing to the Belvedere Waistcoat fronts.  If you are sewing Variation 1, the first step is to create the side seam vents.  These vents can actually be added to either variation if you would like a little bit more room for movement.  The vent expands to create a larger circumference around the stomach while you sit, bend or simply have a full belly after a large meal!

Thread Theory Belvedere Waistcoat Sewalong Front Lining-1

Begin by cutting a small rectangle of fusible interfacing measuring approximately 2″ X 3″.  Apply this to the wrong side of the lining at the bottom of each side seam.  This will help add rigidity to the lining fabric so that the vent appears crisp and flat when finished.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-2

Pin the waistcoat front to the lining with right sides together.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-3

Beginning at the side seam notch, stitch across the 5/8″ seam allowance.  When you get to the seamline, place your needle down in to the fabric and pivot around it.  Stitch an angled line towards the hem notch.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-5

Trim along your stitching so seam allowances are 1/4″ or less to reduce bulk.  Clip up to your stitching at the corner.
Thread Theory Belvedere Waistcoat Sewalong Front Lining-6

Regardless of whether you are sewing Variation 1 or 2, it is now time to sew the hem, front and neckline seams.  If you have added the vent, begin stitching at the hem notch.  If you have not added the vent, begin stitching at the side seam.  Stitch along the hem, pivot at the angled point and then stitch up the front until you reach the shoulder.

To prevent the lining and facing from rolling to the right side when your waistcoat is worn, understitch as far as possible along the hem and front.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-8

To understitch, work from the right side of the garment and stitch the facing and lining to the seam allowance.  Your stitching should be 1/8″ from your original seam.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-10

It won’t be possible to understitch around the angled point at the hem.  Simply stitch as far as possible and backstitch.  Then you can continue a new line of understitching along the hem.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-13

Trim one seam allowance shorter than the other and thoroughly clip in to the seam allowance along curves.  Also clip across corners to reduce bulk.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-11

Next we will close up the armhole.  With raw edges of the fabric even and right sides together, pin the front and lining together along the curve of the armhole.  Match the dart.  Depending on the fabrics that you are using, you may notice that the lining has stretched out or that your wool front has shrunk during the sewing process.  Not to worry!  Lay out the lining so that it flat and equal in size (or slightly smaller) than the waistcoat front.  Trim off the 1/8″ or so excess along the curve of the armhole.  This will help to prevent the lining from peeking out on the right side of the waistcoat at the armhole.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-14

Stitch the armhole curve using a 5/8″ seam allowance.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-15

It is necessary to thoroughly trim the seam allowances and clip in to the curves since the armhole curve is so exaggerated.  These clips will allow the fabric to sit smoothly when the garment is flipped right side out.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-17

And now it is time!  Let’s flip the waist coat front right side out!

Thread Theory Belvedere Waistcoat Sewalong Front Lining-18

Do this by reaching in to the open side seam.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-20

Now give the front a very thorough press.

Thread Theory Belvedere Waistcoat Sewalong Front Lining-21

Are you proud of how beautiful your finished front looks?  I hope so!

Thread Theory Belvedere Waistcoat Sewalong Front Lining-22

Tomorrow we will add on the back and our waistcoats will be VERY close to finished!

Advertisements

One thought on “Waistcoat Sew-Along: Day 9 – Finishing the Front

  1. Pingback: Waistcoat Sew-Along: Day 1 – Supplies | Thread Theory

What do you think? Leave a comment for me :)

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s